Blizzard ProKontrol MH handleiding
Handleiding
Je bekijkt pagina 12 van 20
Page 12
ProKontrol MH Manual Rev. D © 2025 Blizzard Lighting, LLC
3.5.6 RDM DMX Address Setup
1. Press and hold <MENUS> for 2 seconds to enter Menu Mode.
2. Rotate the PAN wheel to locate “05. RDM DMX Address setup”.
3. Press <ENTER> to conrm.
4. Rotate the PAN wheel to select YES or NO; If YES and you press
<ENTER> you will enter RDM operation.
5. The ProKontrol™ MH will search and show the number of RDM
devices.
6. Rotate the PAN wheel to select an RDM device; rotate the TILT wheel
to adjust the DMX address of the RDM device. Press <ENTER> to
conrm.
7. Press <SWAP> to switch the information of the selected device,
Press <DEL> to verify the selected device.
8. Press <ESC> to return to the main men
3.6 Manual Fixture Control
1. Press the <FIXTURE> button to activate FIXTURE mode.
2. Select the desired xtures with the number buttons (1-16) and the
PAGE button (PAGE A: 1-16, PAGE B: 17-32).
3. Move the faders and/or wheels to adjust the DMX output values. In
Step 2, xtures can be selected one by one; Alternatively, you can
select more xtures in a single operation. For example, to select
Fixture 1-8, you can press and hold the number button 1 and then
press the number button 8, Fixture 1-8 will all be selected. The same
can be applied to deselect xtures.
3.7 Fade Mode
1. Press and hold <MENUS> for 2 seconds to enter Menu Mode.
2. Rotate the PAN wheel to locate “04. Fade mode”.
3. Press <ENTER> to conrm.
4. Rotate the PAN wheel to select ALL CHANNEL or ONLY PAN/TILT.
5. Press <ENTER> to conrm or <ESC> to return to the main menu.
3.8 Built-In Movement and Color Eects
There are 9 built-in “movements” in the ProKontrol™ MH, and 7 built-in color
macros for LED xtures. Before running a movement, all xtures must be
patched correctly.
1. Press the <FIXTURE> button to enter FIXTURE mode (indicator on).
2. Select the desired xtures with the number buttons (1-16) and the
PAGE button (PAGE A: 1-16, PAGE B: 17-32).
3. Press the <MOVEMENT> button to activate the MOVEMENT mode.
4. Select a desired MOVEMENT/MACRO with the number buttons (1-16).
5. Movement 1-9 is for the pan/tilt movement of moving heads. By
using the <SWAP> button, toggle through the options.
Bekijk gratis de handleiding van Blizzard ProKontrol MH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blizzard |
| Model | ProKontrol MH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2617 MB |
