Blizzard ProKontrol MH handleiding
Handleiding
Je bekijkt pagina 11 van 20
Page 11
ProKontrol MH Manual Rev. D © 2025 Blizzard Lighting, LLC
3.5.2 Delete All Fixture Patches
1. Press and hold <MENUS> for 2 seconds to enter Menu Mode.
2. Rotate the PAN wheel to locate “03. Delete all Fixture patch”.
3. Press <ENTER> to conrm.
4. Rotate the PAN wheel to select YES or NO.
5. Press <ENTER> to conrm or <ESC> to return to the main menu.
3.5.3 Data Back-Up to USB Memory Stick
1. Press and hold <MENUS> for 2 seconds to enter Menu Mode.
2. Rotate the PAN wheel to locate “06. Data back up”.
3. Press <ENTER> to conrm.
4. Insert a USB memory stick to the USB port (it must be either FAT16 or
FAT32 formatted).
5. Rotate the PAN wheel to select YES or NO; press <ENTER> to conrm.
6. Press a number button to store the back-up le. Up to 16 les can be
backed up, respectively stored in number 1-16 buttons. If the LED indicator
of a number button is on, it means there is back-up le in this position.
7. Press the <ESC> button to return to the main menu.
3.5.4 Load Data From USB Memory Stick
1. Press and hold <MENUS> for 2 seconds to enter Menu Mode.
2. Rotate the PAN wheel to locate “07. Data load.”
3. Press <ENTER> to conrm.
4. Make sure your USB memory stick is in the USB port.
5. Rotate the PAN wheel to select YES or NO; press <ENTER> to conrm.
6. Press a number button to load the back-up le. Up to 16 les can be
backed up, respectively stored in number 1-16 buttons. If the LED indicator
of a number button is on, it means there is back-up le in this position.
7. Press the <ESC> button to return to the main menu.
Note: To transfer show to another ProKontrol MH, you must make sure the show’s folder name is
the same on both controllers. You can view the folder name by inserting the loaded USB stick into a
computer. If they do not match, simply change the name of the original controller’s folder name to the
new controller’s folder name, which will most likely be named ProkontrolMH.
3.5.5 Send Fixture Update File (RDM Fixtures Only)
Through the DMX cable, send xture rmware code.
1. Press and hold <MENUS> for 2 seconds to enter Menu Mode.
2. Insert a USB memory stick to the USB port.
3. Rotate the PAN wheel to locate “08. Send xture Update le”.
4. Press <ENTER> to conrm.
5. Rotate the PAN wheel to locate the le to send.
6. Press <ENTER> to start sending.
7. Repeat Step 4 and 5 to send another le.
8. Press the <ESC> button to exit.
Bekijk gratis de handleiding van Blizzard ProKontrol MH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blizzard |
| Model | ProKontrol MH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2617 MB |
