Blizzard ProKontrol MH handleiding
Handleiding
Je bekijkt pagina 13 van 20
Page 13
ProKontrol MH Manual Rev. D © 2025 Blizzard Lighting, LLC
6. Press <SWAP> to switch between the adjustable parameters.
3.9 Scenes and Chases
3.9.1 Scene Editing
Channels and movements can be edited in a static scene.
1. Press and hold the <REC> button for 2 seconds to enter Editing
Mode.
2. Press the <FIXTURE> button (indicator on).
3. Select the desired xture(s) with the number buttons (1-16) and the
PAGE button (PAGE A: 1-16, PAGE B: 17-32).
4. Move the faders and/or wheels to adjust the DMX output values.
Movements can also be included.
5. Press the <REC> button to get ready to save.
6. Press the <SCENE> button and then press a number button to save
the scene. There are two pages (Page A and B) to save the scenes.
Once a scene is saved successfully, all the LED indicators will blink 3
times.
7. Repeat Step 3-6 to edit another scene.
8. Press and hold the <REC> button for 2 seconds to exit Editing Mode.
3.9.2 Chase Editing
Channels, scenes and movements can be edited in a chase.
1. Press and hold the <REC> button for 2 seconds to enter Editing
Mode.
2. Press the <CHASE> button (indicator on).
3. Select a number button for the chase.
Movement Range
Pan: 0-100% TL: 0-100%
Adjusts the movement size.
Movement Oset
Pan: 0-255 TL: 0-255
Adjusts the movement center point.
Movement Speed
0.00-30.00s
Adjusts the time needed to complete one step.
Delay Level
Level: 00-25
Steps to oset each xture.
Bekijk gratis de handleiding van Blizzard ProKontrol MH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blizzard |
| Model | ProKontrol MH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2617 MB |
