Blackstar Polar 2 handleiding
Handleiding
Je bekijkt pagina 9 van 27
9
Panels – A Closer Look (cont’d)
Immediately hear the tone of your guitar slightly bloom and come alive, making
any guitar amp plugin sound like you’re playing through a real amp!
Another feature that makes Polar 2’s Enhance switch ground-breaking for
recording guitars directly is that it completely prevents digital clipping, no matter
how much input gain you add. This special circuit allows you to drive Polar’s
inputs like a valve amp’s preamp section.
2. XLR Cable Connected
When an XLR cable is connected, the LINE/INST switch is disabled, and the
Polar 2 enables its studio quality microphone preamps.
Switching on Enhance on the microphone preamps adds a gentle high shelf EQ
to the signal.
Dialled in by Blackstar’s very own sta who have decades of experience in
professional audio engineering and production, this high shelf EQ
subtly lifts the top end to bring out just the right amount of air and clarity from
vocal performances, even acoustic guitars, and more.
Monitor Level Control
The large monitor control allows you to adjust
the output level sent to the Balanced Outputs
on the rear panel, typically connected to your
studio monitors.
Turn the knob clockwise to increase the volume
and counter-clockwise to decrease the volume.
NOTE: If you have a ¼” jack cable connected to the input and LINE selected, the Enhance
switch will be disabled.
If you notice the Enhance switch isn’t adding the enhanced eect on your guitar signal, make
sure you’ve selected INST.
TIP: For the most resolution over your output level control, try setting up your studio monitor
level in this order:
1. Turn the volume on your studio monitors all the way down.
2. Turn the Monitor Control Knob up to about 3 o’clock.
3. Playback your audio and gradually turn up the volume of your studio monitors until
the level is at the loudest that you need.
Now you have detailed control over the full range of your output level needs, while leaving
some room for a bit more passed 3 o’clock when necessary.
NOTE: The Output LED Meters are pre-fader, meaning they will show the dBFS level of
the signal coming from your computer even if the Monitor Level Control is turned all the
way down.
GAIN GAIN
ONOFF
ON
ENHANCE
ENHANCE
OFF
LINE INST
LINE INST
OV
-3
-6
-12
-18
-24
-24
I 2
OV
-3
-6
-12
-18
I 2
MONITOR
INPUTS OUTPUTS
1 2
POLAR 2
FET INPUT INTERFACE
Contents Page
Bekijk gratis de handleiding van Blackstar Polar 2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blackstar |
| Model | Polar 2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6005 MB |
