Berbel Ergoline 2 BKH 110 EG-2 Handleiding (132 Pagina's)

Handleiding

119

Installation

6006910_0 – 18.11.2023

EN

1 Insert the lower section horizontally into the device until

it reaches the rear stop.

1 Pivot the lower section upwards until both magnetic

fasteners can be heard to click into place.

1 Check that the lower section is inserted correctly and is

held by the retaining magnets.

1 Close the front panel.

3.4.9 Check and carry out commissioning

. ATTENTION!

Risk of disruptions due to moisture in the device!

If the device is moved from a cold environment into a hot

one, condensation may form inside.

1 Wait about 2-3 hours before bringing the device into

service.

1 Check that the mains plug is freely accessible or that

an all-pole isolating device (min. 3 mm contact gap) is

present.

1 Check that the mains cable and the electrical connection

cable are not kinked, crushed or damaged.

1 Ensure that air outlets are not closed or covered.

1 Make sure that the ventilation slots are free.

1 Make sure that the protective film is removed.

1 Check the correct functioning of the device.

, “4. Operation” (page 120).

Bekijk gratis de handleiding van Berbel Ergoline 2 BKH 110 EG-2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.