Berbel Ergoline 2 BKH 110 EG-2 Handleiding (132 Pagina's)

Handleiding

117

Installation

6006910_0 – 18.11.2023

EN

3.4.5 Install filter

The filter is placed correctly when the bottom edge of the

filter is parallel to the top edge of the fan‘s housing.

. CAUTION!

Danger of injuries due to sharp edges!

The side panels of the fan box have edges that can cause

cutting injuries to the hands, e.g. with rough handling of the

filter attachment.

1 Carefully fit the filter from above.

1 Avoid contact with the side panels.

1 Place the recirculated air filter on the guide aids on the

fan outlet from above.

1 Ensure that the recirculated air filter is correctly installed.

3.4.6 Establish electrical power supply

1 Observe the voltage specifications on the type plate.

1 Plug the cold device plug into the socket on the fan

housing.

1 Plug the mains plug into the socket.

1 Route the cable such that it is not kinked, crushed or

damaged and so that it will not get in the way when

replacing the filter filling.

1 Make sure that the device can be disconnected on all

poles from the electricity supply after installation.

The device is ready for operation.

Bekijk gratis de handleiding van Berbel Ergoline 2 BKH 110 EG-2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.