Beem Fresh Aroma handleiding
Handleiding
Je bekijkt pagina 26 van 75
25 EN
continues to be continuously lit. Then you can use the Hour (29) and Minute (20) buttons
to set the standby time.
2. After setting the standby time, the time will ash continually for 5 seconds for you to
conrm it. Alternatively, you can press the Programme button (19) to conrm the time,
whereupon the appliance will return to standby mode.
Automatic activation
1. To set the automatic activation time, press the Programme button (19) and the corre-
sponding display will switch on. The “Programme”, “PM” or “AM” icons will show on the
LCD display and the automatic activation time will ash. Coffee bean strength (28) will
continue to be continuously lit.
2. You can use the Hour (29) and Minute (20) buttons to adjust the automatic activation
time. After the automatic activation time has been set, press the “Programme (19) button
to conrm the automatic activation time and to enter automatic activation mode. If the
Programme (19) button is not pressed, the automatic activation time will continuously
ash for 5 seconds and then the appliance will return to standby mode.
3. To cancel the setting, press the Programme button (19) again. The corresponding indica-
tor will turn off and the “Programme” icon will disappear from the LCD.
After the automatic activation time is started, the Power (24) button can be pressed to
make the appliance enter into espresso brewing mode.
Setting coffee strength
1. Hold the Programme button (19) for 3 seconds. The LCD display will show the time in
“PM” or “AM” and Coffee bean strength (28) will ash. Press the Programme button (19)
to adjust the coffee strength („
“, „ “, „ “ and „ “ in sequence).
2. After setting the coffee strength, the selected coffee strength will continuously ash for 5
seconds for conrmation. The appliance will then return to standby mode.
(1) If you want to set the standby time or the automatic activation time, you can press the
Power (24) or Brewing/Off (30) button to exit the current setting mode and have the
appliance directly enter into the espresso brewing mode or lter coffee brewing mode.
(2) The espresso brewing system can be operated while the lter coffee brewing system
is in operation.
(3) During the keep-warm stage, the espresso brewing system can work, and both
heaters can be activated at same time.
3. Turn the appliance off and disconnect it from the power supply when not use.
CAUTION!
• Do not leave the appliance unattended during operation.
Bekijk gratis de handleiding van Beem Fresh Aroma, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Beem |
| Model | Fresh Aroma |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7133 MB |
