Barco MUIP-2213 handleiding
Handleiding
Je bekijkt pagina 20 van 38
R5916765 /01 MUIP-221320
Liquids and moisture
Never expose the equipment to liquids or moisture.
Never use the equipment near water - e.g. near a bathtub, washbasin, swimming pool, kitchen sink, laundry
tub or in a wet basement.
To check the IP rate, please refer to the product label or the specifications table.
The power supply is IPx0 (when provided).
Moisture condensation
Do not use the equipment under rapidly changing temperature and humidity conditions or avoid direct contact
with cold air from air-conditioning outlet.
Moisture may condense on the surface or inside of the equipment, or create a mist residue inside the
protection plate. This is not a malfunction of the product itself, although it may cause damage to the
equipment.
If condensation exists, leave the equipment unplugged until there is no condensation.
Ventilation
When installing the device in a cupboard or another enclosed location, heed the necessary space between the
set and the sides of the cupboard.
The LCD panel becomes warm during operation. This is not a malfunction. Allow adequate air circulation to
reduce the temperature of the equipment.
Installation
• Place the equipment on a flat, solid and stable surface that can support the weight of at least 3 units. If you
use an unstable cart or stand, the equipment may fall, causing serious injury to a child or adult and/or
serious damage to the equipment.
• Do not allow to climb or rest on the equipment.
• When the equipment is attached to an arm, do not use the equipment as a handle or grip in order to move
the equipment. Please refer to the instruction manual of the arm for instructions on how to move the arm
with the equipment.
• Provide full attention to safety during installation, periodic maintenance and examination of this equipment.
• Sufficient expertise is required for installing this equipment, especially to determine the strength of the wall,
arm or ceiling suspension for withstanding the display’s weight. Be sure to entrust the attachment of this
equipment to the wall to a duly skilled technician and pay adequate attention to safety during the
installation and usage.
• The manufacturer is not liable for any damage or injury caused by mishandling or improper installation.
• When the display is assembled in the medical system, take care of unwanted detachment.
• The equipment should be installed near an easily accessible place. Do not install or leave the unit in places
subject to extreme temperatures, near a radiator, heating vent, or in places subject to mechanical vibration
or shock. Subjecting the LCD display to extreme temperatures, could cause deformations of the casing or
malfunctions.
• Avoid placing the unit near any equipment that generates a strong electro-magnetic field, such as surgical
knifes or other medical appliances.
• Avoid places subject to inordinate amounts of dust, dirt, or sand, for example near an open window or an
outdoor exit.
• If setting up temporarily in an outdoor environment, be sure to take adequate precautions against airborne
dust and dirt. Otherwise unrecoverable malfunctions could occur.
Handling
Do not press on or scratch the front protection screen. Do not place a heavy object on the equipment.
If the equipment is used in a cold place, a residual image may appear in the screen. This is not a malfunction.
The screen returns to normal as the temperature rises to a normal operating level.
If a still picture is displayed for a long time, a residual image may appear for a while. The residual image will
eventually disappear.
Important information
Bekijk gratis de handleiding van Barco MUIP-2213, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Barco |
| Model | MUIP-2213 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3833 MB |
