Barco MUIP-2213 handleiding
Handleiding
Je bekijkt pagina 21 van 38
21R5916765 /01 MUIP-2213
Transportation
Disconnect the cable from the equipment when transporting.
When you transport the equipment, hold it firmly in both hands. If you drop the equipment, you may be injured
or the equipment may be damaged.
When you transport the equipment for repair or shipment, use the original cardboard box and packing
materials.
Batteries
• This device uses an RTC battery (Mod. CR-2032) and a Lithium Ion battery pack (Mod. RRC2130).
• RTC battery (Mod. CR-2032), normal voltage: 3V. Normal capacity: 220mAh.
• Lithum Ion battery pack (Mod. RRC2130), normal voltage: 7.2V. Normal capacity: 4.17Ah.
• Both batteries are not user-replaceable. Do not attempt to replace them, contact Barco authorized repair
facilities
• Batteries used with this equipment have been tested for compatibility and should only be replaced with
approved parts.
• The batteries are not designed to be charged by any other electrical source. Charging could generate gas
and internal short-circuiting, leading to distortion, leakage, overheating, explosion, or fire.
Connection of PEMS by network/data coupling to other equipment
• Connection of the PEMS to a network/data coupling that includes other equipment could result in
previously unidentified risks to patients, operators or third parties.
• The responsible organization should identify, analyze, evaluate and control these risks.
• Subsequent changes to the network/data coupling could introduce new RISKS and require additional
analysis.
• Changes to the NETWORK/DATA COUPLING include:
- Changes in NETWORK/DATA COUPLING configuration;
- Connection of additional items to the NETWORK/DATA COUPLING;
- Disconnecting items from the NETWORK/DATA COUPLING;
- Update of equipment connected to the NETWORK/DATA COUPLING;
- Upgrade of equipment connected to the NETWORK/DATA COUPLING.
Malfunctions
Disconnect the equipment’s power cord from the AC inlet and refer servicing to qualified service technicians
under the following conditions:
• If the power cord or plug is damaged or frayed.
• If liquid has been spilled into the equipment.
• If the equipment has been exposed to rain or water.
• If the equipment does not operate normally when the operating instructions are followed. Adjust only those
controls that are covered by the operating instructions since improper adjustment of other controls may
result in damage and will often require extensive work by a qualified technician to restore the product to
normal operation.
• If the equipment has been dropped or the cabinet has been damaged.
• If the product exhibits a distinct change in performance, indicating a need for service.
General warnings
• All devices and complete setup must be tested and validated before taking into operation.
• At end user application level, it is necessary to foresee a backup unit in case the equipment fails.
• The enclosure has to be checked upon collision damage; refer to qualified service personnel.
• The LCD User Interface is intended for indoor use.
• The LCD User Interface is not intended to be sterilized.
• The LCD User Interface has not applied parts, but the front side of the LCD panel and the plastic enclosure
have been treated as applied part because considered accidentally touchable by the patient for a time ≤1
minute.
• Do not connect to the internet before you have installed an anti-virus software and Internet firewall to
protect the Barco User Interface from viruses.
Important information
Bekijk gratis de handleiding van Barco MUIP-2213, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Barco |
| Model | MUIP-2213 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3833 MB |
