Baofeng UV-28 Plus handleiding

Niet gecategoriseerd

Baofeng

31 pagina's

PDF beschikbaar

Handleiding

(5) [6] [6] 123.0 Selects desired TX encode tone (Ex 123 CTCSS)

(6) Enter RX frequency (Ex. 43265000) Enter RX frequency (Ex. 43265000)

(7)

[6] [1][2] [1][0] Enter the same channel (Ex 10)

-->>

Channel has been added

(8) Press V/M key to return to the MR mode and the channel number will reappear.

6.4 Repeaters Programming

The following instructions assume that you know what transmit and receive frequencies your repeater employs, and that you're authorized to use it.

(1) Press V/M key, the transceiver is set to VFO mode, and the VFO icon will be displayed on the right.

(2) Use the numeric keypad to enter the repeater's output (your receive) frequency.

(3) Press

[6] [1][0] to get the offset frequency.

(4) Use the numeric keypad to enter the specified frequency offset.

(5) Press

to confirm and save.

(6) Press

[6] [1][1] to get the offset direction.

(7) Use the  or  keys to select plus (positive) or minus (negative) offset.

(8) Press

to confirm and save.

(9) Optional:

a) Save to memory, see the section called “Manual programming” for details.

b) Set up CTCSS; see the section called “CTCSS” for details.

(10) Press

to exit the menu. If everything went well, you should be able to make a test call through the repeater.

NOTE:

If you're experiencing problems making a connection to the repeater, check your settings and/or go through the procedure again.

Certain Amateur Radio repeaters (especially in Europe) use a 1750Hz tone burst to open up the repeater. To see how this is done with the radios, see the

section called “1750Hz Tone-burst”.

If you're still unable to make a connection, contact the person in charge of the radio system with your employer or your local amate ur radio club, as the case

may be.

6.5 Bluetooth write frequency

You can read and write frequency through Bluetooth. Before performing Bluetooth read and write frequency, you need to install an APP program.

The operation of the radio is as follows:

1. Press

+ [3] to enter Bluetooth.

2. Press the or  keys to select "ON";

The first line of the screen will display

icons.

6.6 GPS function

Optional features that require hardware support.

Bekijk gratis de handleiding van Baofeng UV-28 Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.