Baofeng UV-28 Plus handleiding
Handleiding
Je bekijkt pagina 17 van 31
The dual watch function is turned on, and the icon is displayed on the top line of the screen.
·Repeat the above operation, select "OFF", the dual watch function is disabled, and the icon
on the top line of the screen disappears.
6.3 Manual Programming (Channels Memory)
Memory channels are an easy way to store commonly used frequencies so that they can easily be retrieved at a later date.
The radio has 10 zones, with a maximum of 100 channels stored in each zone. Each channel can store: Receive and transmit frequencies, transmit power,
group signaling information, bandwidth, ANI/ PTT-ID settings and a six character alphanumeric identifier or channel name
1
.
Frequency Mode vs. Channel Mode
In standby mode, press V/M key to switch between frequency (VFO) mode and channel (MR) mode.
These two modes have different functions and are often confused.
Frequency Mode (VFO): Used for a temporary frequency assignment, such as a test frequency or quick field programming if permitted.
Channel Mode (MR): Used for selecting preprogrammed channels.
Ex 1. Programming a Channel Repeater Offset with CTCSS Tone
EXAMPLE New memory in Channel 10:
RX = 432.55000 MHz
TX = 437.55000 MHz (This is a (+ 5) Offset)
TX CTCSS tone 123.0
(1) Press the
key to switch between menus.
(2) Press V/M key to set the radio to VFO mode, and the VFO icon is displayed.
(3)
[6] [1][3] [1] [0] Deletes Prior Data in channel (Ex. 10)
(4)
[6] [4] 123.0 Selects desired RX encode tone (Ex 123 CTCSS)
(5)
[6] [6] 123.0 Selects desired TX encode tone (Ex 123 CTCSS)
(6)
[6] [1][0] [0] [0] [5] [0] [0] Enter the OFFSET frequency (Ex. 5.00MHz)
(7)
[6] [1][1] [+] Select the offset direction (Ex. plus offset
(8) Enter RX frequency (Ex. 43255000) Enter RX frequency (Ex. 43255000)
(9)
[6] [1][2] [1][0] Enter the same channel (Ex 10)
-->>
Channel has been added
(10) Press V/M key to return to the MR mode and the channel number will reappear.
Ex 2. Programming a Simplex Channel with CTCSS tone
EXAMPLE New memory in Channel 10:
RX = 432.6500 MHz
TX CTCSS tone 123.0
(1) Press the
key to switch between menus.
(2) Press V/M key to set the radio to VFO mode, and the VFO icon is displayed.
(3)
[6] [1] [3] [1] [0] Deletes Prior Data in channel (Ex. 10)
(4)
[6] [4] 123.0 Selects desired RX encode tone (Ex 123 CTCSS)
Bekijk gratis de handleiding van Baofeng UV-28 Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baofeng |
| Model | UV-28 Plus |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3629 MB |
