Baofeng UV-25 Plus handleiding

Niet gecategoriseerd

Baofeng

44 pagina's

PDF beschikbaar

Handleiding

• QT + DTMF: With this option, the monitor is activated when the radio receives the correct CTCSS tone and the correct DTMF code.

• QT*DTMF: The monitor is activated when the radio receives the correct CTCSS tone or the correct DTMF code.

(14) Scan Add (Scan Add) – +14

In channel mode, to scan the current channel, the channel must be added to the scan group.

• On: Turn on the scan function of the current channel.

• Off: Do not scan the current channel.

(15) Busy Channel Lock (Busy Lock) – +15

When this function is on, it may prevent other radios’ interference. If the selected channel is being used by other radios, when you press key PTT, your radio

cannot transmit.

Release the PTT and transmit as soon as the frequency is no longer busy.

(16) Channel Memory - (CH-Memory) – +16

This menu is used to either create new or modify existing channels (1 through 100) so that they can be accessed from MR/Channel Mode.

The channels already stored are displayed as CH-XXX ("CH" and -channel number), and other channels only display channel numbers.

(17) Channel Delete (CH-Delete) – +17

This menu is used to delete the programmed information from the specified channel (1 through 100) so that it can either be programmed again or be left

empty.

* Differences in menus in frequency mode

(14) Frequency offset (Offset) – + 13

In this menu you can set the deviation between tx and rx. The frequency offset of this radio is 00.000-99.998MHz.

(15) Frequency offset direction (Direction) – + 14

Using this function, you can set the direction of the frequency offset in rx and tx.

You have the following options:

• OFF: No offset.

• Plus: Positive offset(+);

• Minus: Negative offset(-);

7.6 Radio Info

Show the Radio ID, firmware version, Hardware version.

Bekijk gratis de handleiding van Baofeng UV-25 Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.