Baofeng K6 handleiding
Handleiding
Je bekijkt pagina 24 van 38
In standby mode, press [V/M] key to switch between frequency (VFO) mode and channel (MR) mode.
These two modes have different functions and are often confused.
Frequency Mode (VFO): Used for a temporary frequency ass ignment, such as a test fre quency or quick field progra mming, if permitted.
Channel Mode (MR): Used for selecting prepro grammed channels.
Ex 1. Programming a Channel Repeater Offset with CTCSS Tone
c. [MENU] [1][4] [MENU] [1] [0] [MENU] [EXIT] Deletes Prior Data in channel (Ex. 10)
d. [MENU] [0][5] [MENU] 123.0 [MENU] [EXIT]
EXAMPLE New memory in C hannel 10:
RX = 432.55000 MHz
TX = 437.55000 MHz (This is a (+ 5) Offset)
TX CTCSS tone 123.0
a. Press the [EXIT] key to switch between menus.
b. Press [V/M] key to set the radio to VFO mode, and the VFO icon is displayed on the left.
Selects desired TX encode tone
e. Enter RX frequency (Ex. 43255000)
f. [MENU] [1][3] [MENU] [1][0] [MENU] Enter the desired channel (Ex 10)
-->>[EXIT] RX has been added
g. Enter TX frequency (Ex. 43755000)
h. [MENU] [1][3] [MENU] [1][0] [MENU] Enter the same channel (Ex 10)
-->> [EXIT] TX has been added
i. Press [V/M] key to return to the MR mode a nd the channel number will reappear.
Ex 2. Programming a Simplex Channel with CTCSS tone
EXAMPLE New me mory in C hannel 10:
RX = 432.6625 MHz TX CTCSS tone 123.0
a. Press the [EXIT] key to switch between menus.
b. Press [V/M] key to set the radio to VFO mode , and the VFO icon is displayed on the left.
c. [MENU] [1][4] [MENU] [1] [0] [MENU] [EXIT] Deletes Prior Data in channel (Ex. 10)
-21-
Bekijk gratis de handleiding van Baofeng K6, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baofeng |
| Model | K6 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4952 MB |
