Baofeng K6 handleiding
Handleiding
Je bekijkt pagina 25 van 38
d. [MENU] [0][5] [MENU] 123.0 [MENU] [EXIT] Select desired TX encode tone (Ex 123 CTCSS)
-->>Use [EXIT] to select Upper display
e. Enter RX frequency (Ex. 43266250)
f. [MENU] [1][3] [MENU] [1][0] [MENU] Enter the desired channel (Ex 10)
-->> [EXIT] Channel has been added
g. Press [V/M] key to return to the MR mode and the channel number will reappear.
6.4 Repeaters Programming
-22-
The following instructions assume that you know the transmit and receive frequencies your repeater uses and that you're authorized to use it.
a. Press the [V/M] key to set the radio to VFO mode , and the VFO icon is displayed on the left.
b. Use the numeric keypad to enter the repeater's out put (your receiving) frequency.
c. Press the [MENU] key to enter the menu.
d. Enter [1][2] o n the numeric keypad to get to the frequenc y offset.
e. Press the [MENU] key to select.
f. Use the numerical keypad to enter the specified frequency offset. See the section called “12 OFFSET - Frequency shift amount” for details.
g. Press the [MENU] key to confirm and save.
h. Enter [1][1] o n the numeric keypad to get to offset direction.
i. Use the keys to select + (positive) or - (negative) offset.
j. Pres the [MENU] key to confirm and save.
k. Optional:
a). Save to memory, see the sectio n called “Manual programming” for details.
b). Set up CTCSS; see the section called “CTCSS” for details.
l. Pres the [EXIT] key to exit the menu. If everything went well, you should be able to make a test call through the repeater.
NOTE:
If you're experiencing problems making a connection to the repeater, check your settings and/or go through the procedure again.
Certain Amateur Radio repeaters (especially in Europe) use a 1750Hz tone burst to open up the repeater. To see how this is done with the radios,
see the section called “1750Hz Tone-burst”.
If you're still unable to make a connection, contact the person in charge of the radio system with your employer or your local amateur radio club,
as the case may be.
If you want to listen to the repeater's input frequency instead, press the key momentarily to reverse your transmit and receive frequencies.
Bekijk gratis de handleiding van Baofeng K6, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baofeng |
| Model | K6 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4952 MB |
