Baofeng DM-32UV handleiding
Handleiding
Je bekijkt pagina 26 van 59
(2) Select a scan list and press to enter scan list submenu. Make the following settings:
-Apply: Enable the current scan list.
-Edit/View List: Edit the current list, you can add or delete scan channels for the current list, set the priority scanning channels.
>>Cur Chan: -Edit Priority Channel. Edit Priority Channel 1, Priority Channel 2, Disable Priority Channel.
>>Display add channels (members of scan list)
>>Add Chan: Allows to continue add channels to this list, jump to the channel list (available channels).
-Edit Name: allows to reset the list name.
-Set Priority Channel
You can set the currently selected channel as a priority or non-priority channel. If you need to focus on activity on a particular channel, you can
set it as a priority channel. Priority channels are scanned more frequently than non-priority channels. A maximum of two priority channels can
be set in each scan list; P1 for priority channel 1 and P2 for priority channel 2.
-To delete a channel from the scan list
Select “Delete” to remove it from the scan list. However, you cannot delete the first channel in the scan list.
7.2.3 VFO Scan Range
In frequency mode, you can set the VFO scan range, scan recovery method, and step frequency.
VFO scan range, i.e. the frequency to start scan and end scan.
(1) Press the
key to enter Main Menu -> Scan -> VFO ScanRange (V)
(2) Press the
key to enter the VHF band scan range setting.
(3) Through the numeric keypad, input the scan range, such as scan range 144-146MHz, input [1][4][4][1][4][6].
-Set the scan range for the UHF band in the same way.
7.2.4 VFO Scan Modes
The following scan recovery methods are supported in frequency mode:
-TO (Time Scan): The scan will stop when a signal is detected and it will resume scan after 5s of staying in the channel.
-CO (Carrier Scan): Scanning will stop when a signal is detected until the signal disappears, and it will resume scanning 2s after the signal
disappears.
-SE (Search Scan): The scan will stop when a signal is detected and it will terminate the scan.
7.2.5 Scan CTCSS
Scan CTCSS in the case of known frequencies.
(1) Press the
key to enter Main Menu >> Scan >> Scan CTCSS.
25
Bekijk gratis de handleiding van Baofeng DM-32UV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baofeng |
| Model | DM-32UV |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7451 MB |
