Baofeng DM-32UV handleiding
Handleiding
Je bekijkt pagina 27 van 59
(2) Press the key to start CTCSS scan. A valid CTCSS code is scanned and the horn turns on.
7.2.6 Scan DCS
Scan for DCS in a known frequency situation.
(1) Press the
key to enter Main Menu >> Scan >> Scan DCS.
(2) Press the
key to start DCS scan. A valid DCS code is scanned and the horn turns on.
7.2.7 Scan CTCSS/DCS Memory
In Channel Mode or Frequency Mode, scanned CTCSS/DCS can be memory as TX CTCSS/DCS Only, RX CTCSS/DCS Only, and TX& RX CTCSS/DCS
to replace the calls current Channel or Frequency Mode CTCSS/DCS setting.
The CTCSS/DCS scan memory setting is operated as follows:
(1)Press the
key to enter Main Menu>>Scan>>Scan Memory.
(2)Press the
key to enter the CTCSS/DCS scan memory setting, and press ▲/▼ to select:
- TX CTCSS/DCS: The scanned CTCSS/DCS will be stored as the transmit CTCSS/DCS of the current channel or frequency mode (replacing its
TX-CTC/DCS only).
- RX CTCSS/DCS: The scanned CTCSS/DCS will be memory as the receive CTCSS/DCS for the current channel or frequency mode (replacing only
its RX-CTC/DCS).
- All: The scanned CTCSS/DCS will be memory as both the TX and RX CTCSS/DCS of the current channel or frequency mode (as both the TX and
RX CTCSS/DCS).
(3) Press the
key to save the setting and return to the previous menu level;
NOTE: Only when a valid CTCSS/DCS is scanned and stays, press the key to memory the CTCSS/DCS and replace the corresponding CTCSS/DCS for
the current channel or frequency.
7.2.8 Frequency Scan
Press and hold the
key to switch to VFO mode and enter the frequency via the numeric keypad. Press the pre-programmed [Scan] key to
turn on the scan function. Or operate through the menu function as follows:
(1) Press the
key to enter the main menu -> Scan -> Scan switch to turn on the scan function.
(2) You can operate as follows during scanning:
-Press ▲ key to scan in preset step frequency increments.
-Press ▼ to scan in preset step frequency increments.
-Scanning to a frequency with activity, the terminal will stay on the active frequency until the activity disappears. While scanning stays,
press and hold the [PTT] key, the LED indicator lights up red, and then speak into the microphone. Release the [PTT] key to answer.
26
Bekijk gratis de handleiding van Baofeng DM-32UV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baofeng |
| Model | DM-32UV |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7451 MB |
