Baby Lock Splendor BLSP8 handleiding

Handleiding

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182/ 82

Afdrukken

Je bekijkt pagina 14 van 82

BL

1

1

2

2

3

C

O

BL

2

O

2

1

1

3

BL

1

1

2

2

3

C

O

BL

2

O

2

1

1

3

BL

1

1

2

2

3

C

O

BL

2

O

2

1

1

3

BL

1

1

2

2

3

C

O

BL

2

O

2

1

1

3

BL

1

1

2

2

3

C

O

BL

2

O

2

1

1

3

Cutting Blade Lock Dial

Cutting Blade Cover and Sewing Table

Upper Looper Positioning Knob

To lock the cutting blade down:

Turn the dial clockwise 180 degrees until you see "LOCK"

on the top. The cutting blade will stay below the needle

plate for non-cutting techniques (g. A).

To re-engage the cutting blade:

Turn the cutting blade locking dial half of a turn count

-

er-clockwise. The blade will move automatically when you

start sewing.

To use the sewing table for chain/cover stitching you will need to

change the cutting blade cover as follows:

a) Open front cover and cutting blade cover (page 16, g. F & G).

b) Depress the center snap and gently pull toward you to unsnap

cutting blade cover (g. A) and then snap sewing table into place

(g. B).

c) Disengage the upper looper by turning the upper looper posi

-

tioning knob to "Down" (g. A, Upper Looper Positioning Knob).

d) Move the stitch width adjusting dial to the 3.0.

e) To close the sewing table door raise to the up position and slide

to the left placing the tab of the table under the needle plate.

f) Close the front cover.

NOTE: Even though you are not using your cutting blade with the

sewing table, the stitch width adjusting dial needs to be moved to its

lowest setting for the table to t against the needle plate.

When changing from overlocking to chain/cover stitching, disengage

the upper looper by changing the upper looper positioning knob to the

"DOWN" position before closing the sewing table door.

a) Turn the handwheel until the upper looper is at its lowest posi

-

tion.

b) Change the upper looper positioning knob to the "DOWN" posi

-

tion (g. A).

c) Close the sewing table door and then the front cover (g. B).

NOTE: Make sure the upper looper positioning knob is in the "UP"

position prior to locking the machine to thread the upper looper.

AA

AA

AA

BB

BB

CAUTION: MOVING PARTS – TO REDUCE THE RISK OF INJURY SWITCH THE MACHINE OFF BEFORE

SERVICING, REPLACING THE CUTTING BLADE COVER OR SEWING TABLE. DO NOT SLIDE

THE CUTTING BLADE COVER WHILE OPERATING THE MACHINE.

O

V

E

R

V

I

E

W

11

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182/ 82

Bekijk gratis de handleiding van Baby Lock Splendor BLSP8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd