Baby Lock Gallant Longarm handleiding
Handleiding
Je bekijkt pagina 56 van 58
56 | www.BabyLock.com
Thread caught in wheels • Remove all thread or debris from the wheels.
• Check that the tracks are free of lint and threads.
Motor Fails to Run Correcve Measure(s)
On/O switch turned o • Make sure that the power switch is in the on posion.
Machine not receiving power • Check that the power connector is securely plugged into the
back of the machine and the three-prong end is plugged into the
power source. Unplug and re-plug.
Uneven Quilt Design Correcve Measure(s)
Take-up rollers may be bowed
or bent
• Make certain the fabric is not rolled too ght, causing the poles to
bow. Check that poles are inserted completely together with the
push buons engaged so bowing won’t occur.
Leaders are stretched or worn • If fabric is beginning to stretch or fray, contact Baby Lock to
purchase replacement leaders.
Thread Breaks Correcve Measure(s)
Poor quality thread, may have
severe twisng or thread rot
• Look for severe twisng of threads when approximately 12 to 15
inches has been pulled o, with the ends pinched together.
• Coon threads are parcularly suscepble to dry rot or wet rot
which makes thread brile.
• Do not use poor quality thread, or thread that is roed or brile.
Top and bobbin tensions not
balanced
• Balance the tension of the needle thread aer ensuring the
bobbin tension is adjusted correctly. (For more informaon about
adjusng tension, see Bobbin and Bobbin Tension in the Using
Your Machine secon of this manual.)
The machine has been threaded
incorrectly or thread spools are
not posioned correctly
• Check that the machine is threaded correctly. Refer to diagram
on Quick Reference Card.
• Check for accidental double wrapping of thread on thread guides.
• Check the thread mast, making sure the eyelet of the mast is
directly over the cone.
• Check the posion of the thread cone. Tipped cones can
dramacally aect thread tension and can cause breakage.
Debris in tension discs • Inspect for parcles and remove any fuzz or debris.
Bobbin rotaon is not smooth • Change the bobbin. The slightest hesitaon of the bobbin
rotaon can be the cause of dramac tension change and
thread breakage.
Bekijk gratis de handleiding van Baby Lock Gallant Longarm, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baby Lock |
| Model | Gallant Longarm |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12386 MB |
