Baby Lock Gallant Longarm handleiding
Handleiding
Je bekijkt pagina 57 van 58
Gallant User Manual | 57
Needle is burred, bent or dull, or
installed incorrectly
• Change the needle at least once per quilt. Make sure the needle is
installed to the top of the sight hole in the needle bar.
Needle not suitable for thread • Replace the needle to one beer suited for the thread. Use the
proper size needle. Refer to chart in Machine Needle secon.
Hesitang too long at one point
in quilng mof
• Move more quickly so stches don’t overlap or build up. When
starng the machine, begin moving immediately. Sewing in one
place too long will cause the thread to break.
Improper needle/hook
relaonship
• Machine ming needs to be checked. Consult an authorized
Baby Lock technician.
Damage or burr at needle hole
of throat plate or other thread
handling part
• If thread is shredding at the throat plate, check for burrs or jagged
edges. Gently rub with emery cloth to remove the sharp edge.
Consult a repair technician to polish any hard-to-reach or delicate
areas.
Wrong type of needle • Use only the needles recommended by Baby Lock
(needle system 134, sizes 12 through 21).
Other possible problems • Needle too close to hook, causing fricon and possible collision
of hook point and needle (causing broken thread).
• Needle plate damage
• Hook damage
• Broken needles or damaged needle bar clamp
NOTE: If the troubleshoong ps do not eliminate the problem, please consult an
authorized Baby Lock retailer.
Bekijk gratis de handleiding van Baby Lock Gallant Longarm, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baby Lock |
| Model | Gallant Longarm |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12386 MB |
