Baby Lock Gallant Longarm handleiding
Handleiding
Je bekijkt pagina 55 van 58
Gallant User Manual | 55
Tension Is Poor Correcve Measure(s)
Lint caught under the tension
spring on the bobbin case
• If using short staple threads, inexpensive threads, industrial
threads, or coated threads, lint and other material will build up
under the tension spring and begin to li the spring. This reduces
the spring’s ability to compress against the thread. Insert the
corner of a business card under the spring and clear out the lint.
The bobbin tension will return fairly close to its preset tension.
Test the tension before quilng.
Hand Wheel Won’t Rotate Correcve Measure(s)
Thread is entangled and caught
in the hook
• There may be a thread lock. Quickly rock the hand wheel, at the
back of the machine, back and forth several mes. You may need
another person to turn the hand wheel while you look for the
thread that is caught. Once thread lock is cleared re-oil the hook
and make sure the hand wheel turns freely.
There is a thread lock. • Carefully rock the hand wheel in direcon of moon and then
the other direcon unl the thread lock breaks free. Once the
hand wheel can be turned freely, remove the thread from the
hook and basket. Now re-oil the hook and make sure the hand
wheel turns freely without the hook hing the needle. It is
possible for a thread lock to cause a ming problem.
Thread Nests under Quilt Correcve Measure(s)
Not enough tension on top
thread
• Check that the machine is threaded correctly. Make certain that
the thread is ossed snugly in place between the two tension
discs. If the machine is threaded correctly, ghten top tension by
rotang the tension knob clockwise. (For more informaon
about adjusng tension, see Bobbin and Bobbin Tension in the
Using Your Machine secon of this manual.)
Improper threading • Refer to threading diagram and threading instrucons.
Thread Backlash Correcve Measure(s)
Bobbin thread tangles within
the bobbin case, tangles and
winds onto the hook spindle, or
occasionally forms loops on the
boom of the quilt
• Make sure the bobbin is in the bobbin case correctly and the
thread is coming out from under the tension spring. The bobbin
should rotate clockwise when the thread is pulled.
Hard to Guide Machine Correcve Measure(s)
Carriage wheels not centered
on track
• Center the carriage wheels on top of the connuous track. Refer
to your frame instrucons.
• Check that the machine carriage has not jumped the track.
Bekijk gratis de handleiding van Baby Lock Gallant Longarm, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baby Lock |
| Model | Gallant Longarm |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12386 MB |
