Baby Lock Gallant Longarm handleiding
Handleiding
Je bekijkt pagina 16 van 58
16 | www.BabyLock.com
Spool Pin and Thread Mast
To install the spool pin on the machine
1. You'll need the spool pin with nut and washer.
2. Remove the nut and washer.
3. Place the washer against the top of the
machine cover.
4. Screw the nut onto the spool pin all the way.
5. Place the spool pin through the washer and
into the top cover and ghten it all the way.
6. Hold the spool pin rmly and ghten the nut
with the 8mm wrench (provided). Do not over
ghten.
To install the thread mast onto the machine
1. You'll need the thread mast with washer
and nut.
2. Remove the nut and washer.
3. Place the washer against the top of the
machine cover.
4. Screw the nut onto the thread mast all
the way.
5. Place the thread mast through the washer and
into the top cover and ghten it down to the
nut. Turn unl the loop of the mast is directly
over the spool pin.
6. Hold the thread mast rmly and ghten the
nut with a 10mm wrench (provided). Do not
over ghten.
Machine Head USB Port (built-in)
The USB port is a full USB port that can be used to power a USB device, update the machine soware,
or communicate with accessories. It is located on the side of the machine to the le of the display at
the front.
Bekijk gratis de handleiding van Baby Lock Gallant Longarm, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baby Lock |
| Model | Gallant Longarm |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12386 MB |
