Axxess MITO-01 handleiding

8 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 2 van 8
MITO-01
2
From the 14-pin harness to the aftermarket radio:
• Tapeoffanddisregardthe Redwire,itwillnotbeusedinthisapplication.
• ConnecttheBlue/Whitewiretotheampturnonwire(thiswiremustbe
connectedtohearsoundfromthefactoryamplifier).
• TapeoffanddisregardtheBrownwire,itwillnotbeusedinthisapplication.
• ConnecttheWhiteRCAtotheleftfrontoutput.
• ConnecttheGrayRCAtotherightfrontoutput.
• ConnecttheGreenRCAtotheleftrearoutput.
• ConnectthePurpleRCAtotherightrearoutput.
Note: If the radio does not have RCA outputs, or only one pair, use a line level
convertor (sold separately). Use Axxess part number ALOC648 (4 channel) or
ALOC608 (2 channel) for best results.
Thefollowingwiresareforaftermarketmultimedia/navigationradiosthatprovide
thesewires(ifnotrequired,tapethemoffanddisregardthem):
• ConnecttheLight Greenwiretotheparkingbrakewire.
• ConnecttheBlue/Pink wiretothespeedsense/VSSwire.
• ConnecttheGreen/Purplewiretothereversewire.
Note: Reverse wire is not available on manual transmission vehicles.
Note: To retain these wires, please follow the steps under: From the 2-pin
harness to the vehicle.
• Plugthe14-pinharnessintotheMITO-01.
From the MITO-01 harness:
(a) tothevehicle:
• ConnecttheBlack wirewithaforkconnectortochassisground.
(b) totheaftermarketradio:
• ConnecttheBlackwiretothegroundwire.
• ConnecttheYellowwiretothebatterywire.
• ConnecttheRedwiretotheaccessorywire.
• ConnecttheBluewiretothepowerantennaturn-onwire.
• ConnecttheOrange wiretotheIlluminationwire(iftheaftermarketradiohas
noIlluminationwire,tapeofftheOrangewire).
• ConnecttheWhitewiretotheleftfrontpositivespeakeroutput.
• ConnecttheWhite/Blackwiretotheleftfrontnegativespeakeroutput.
• ConnecttheGraywiretotherightfrontpositivespeakeroutput.
• Connectthe Gray/Blackwiretotherightfrontnegativespeakeroutput.
• ConnecttheGreen wiretotheleftrearpositivespeakeroutput.
• ConnecttheGreen/Black wiretotheleftrearnegativespeakeroutput.
• ConnectthePurplewiretotherightrearpositivespeakeroutput.
• ConnectthePurple/Blackwiretotherightrearnegativespeakeroutput.
• Connectthe20-pinharnessintotheMITO-01.
• Connectthe16-pinand22-pinharnessintothevehicle.
Connections to be made

Bekijk gratis de handleiding van Axxess MITO-01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkAxxess
ModelMITO-01
CategorieNiet gecategoriseerd
TaalNederlands
Grootte913 MB