Axxess AXTC-TY1 handleiding
Handleiding
Je bekijkt pagina 4 van 6
4
Open the driver’s door, and keep open during the programming process.
Cycle the ignition on.
Connect the AXTC-TY1 harness to the AXTC-TY1 interface, and then to
the wiring harness in the vehicle.
The AXTC will enter auto-detect mode. No additional action is required.
The LED will flash Green & Red while the interface programs the radio to
the steering wheel controls. Once programmed, the LED will go out, then
produce a pattern which will identify the radio type installed. Refer to
the Radio LED Feedback section under Troubleshooting for radio types
.
*Only applicable if vehicle came with steering wheel controls
PROGRAMMING
1.
2.
3.
4.
5*.
O
F
F
A
C
C
O
N
S
T
A
R
T
Green & Red LED
Green or Red LED
The LED will go out, then once again quickly flash Green & Red while
the interface programs itself to the vehicle. Once programmed, the LED
will go out again, then turn solid Green.
Cycle the ignition off, then back on.
Test all functions of the installation for proper operation.
6.
7.
8.
Green & Red LED
Green LED
O
F
F
A
C
C
O
N
S
T
A
R
T
O
F
F
A
C
C
O
N
S
T
A
R
T
Note: If the vehicle’s Steering Wheel Controls do not function after the AXTC-TY1 has
completed its programing sequence, hit the reset button on the interface to restart the
programming sequence and test.
Refer to LED Feedback Chart for programming information if needed.
Bekijk gratis de handleiding van Axxess AXTC-TY1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXTC-TY1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 775 MB |
