Axxess AXTC-LN10 handleiding
Handleiding
Je bekijkt pagina 5 van 8
5
REV. 4/3/23 INSTAXTC-LN10
TROUBLESHOOTING
Solid Green
Slow Red Flash
Slow Green Flash
Solid Red
Pass
Fail
Pass
Fail
Pass
Pass
Fail
Fail
Note: If the LED shows Solid Green for Pass (indicating
everything programmed correctly), yet the steering wheel
controls don’t work, make sure that the 3.5mm jack is plugged
in, and plugged into the correct jack in the radio. Once
corrected, press the reset button, then program again
.
Final LED Feedback
At the end of programming the LED will turn Solid Green
which indicates programming was successful. If the LED didn’t
turn Solid Green, reference the list below to understand
which programming section the problem may stem from.
2.
QR Code Scan Here
Further troubleshooting steps and
information can be located at:
axxessinterfaces.com/product/AXTC-LN10
LED Light
Radio
Programming
Section
Vehicle
Programming
Section
1.
LED
Light
Reset
Button
If the interface fails to
function, press and release
the reset button, then repeat
the programming process
from step 4 to try again.
Bekijk gratis de handleiding van Axxess AXTC-LN10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXTC-LN10 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 753 MB |
