Axxess AXTC-LN10 handleiding
Handleiding
Je bekijkt pagina 4 van 8
4
Open the driver’s door, and keep open during the programming process.
Cycle the ignition on.
Connect the AXTC-LN10 harness to the AXTC-LN10 interface, and then to
the wiring harness in the vehicle.
Locate the Volume Up button on the the steering wheel. Program the
interface by tapping the Volume Up button until the LED stops flashing.
*Only applicable if vehicle came with steering wheel controls
The LED will flash Green & Red while the interface programs the radio to
the steering wheel controls. Once programmed, the LED will go out, then
produce a pattern which will identify the radio type installed. Refer to
the Radio LED Feedback section under Troubleshooting for radio types
.
*Only applicable if vehicle came with steering wheel controls
PROGRAMMING
1.
2.
3.
*4.
*5.
O
F
F
A
C
C
O
N
S
T
A
R
T
VOL
+
Tap Volume Up
Green & Red LED
Green or Red LED
The LED will go out, then once again quickly flash Green & Red while
the interface programs itself to the vehicle. Once programmed, the LED
will go out again, then turn solid Green.
Cycle the ignition off, then back on.
Test all functions of the installation for proper operation.
6.
7.
8.
Green & Red LED
Green LED
O
F
F
A
C
C
O
N
S
T
A
R
T
O
F
F
A
C
C
O
N
S
T
A
R
T
Bekijk gratis de handleiding van Axxess AXTC-LN10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXTC-LN10 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 753 MB |
