Axxess AXSWCH-FD1 handleiding
Handleiding
Je bekijkt pagina 1 van 4
AXSWCH-FD1
INSTALLATION INSTRUCTIONS
AxxessInterfaces.com © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION REV. 6/19/25 INSTAXSWCH-FD1
ATTENTION: With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
NOTE: Refer to the instructions included with
the aftermarket radio.
INTERFACE FEATURES
• Pre-wired AXSWC harness (AXSWC sold separately)
• Designed for SYNC
®
systems when removing 4.3” screen
• Retains factory backup camera
INTERFACE COMPONENTS
• AXSWCH-FD1 harness
• AXSWC interface (sold separately)
APPLICATIONS
TOOLS REQUIRED
• Wire cutter
• Crimp tool and connectors
(example: butt-connectors, bell caps, etc.)
or
• Solder gun, solder, and heat shrink
• Tape
• Zip-ties
TABLE OF CONTENTS
Connections ............................................................2
Steering Wheel Control Harness
Fits Select Ford Models 2013-2019
Visit AxxessInterfaces.com for more detailed information about the product and
up-to-date vehicle specific applications
Ford
Escape ........................................................2013-2015
Transit ........................................................2015-2019
Bekijk gratis de handleiding van Axxess AXSWCH-FD1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXSWCH-FD1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 332 MB |
