Axxess AXPIO-HD2 handleiding
Handleiding
Je bekijkt pagina 4 van 24
4
FAIRING DISASSEMBLY (CONT)
5. Remove (11) screws securing the
radio“dummy” bracket: (Figure E)
a. Two (2) T-27 Torx screws shared with
the gauge cluster and a third (1) T-27
Torx screw to remove the gauge
cluster in step 7.
b.
(4) 5/32" Allen screws facing
outward.
c. (4) T-25 Torx screws secured to the
radio “dummy”.
d. One (1) T-25 Torx screw shared with
the storage pocket.
6. Remove the radio bracket. (Figure E)
Note: This bracket will be reused with
the kit assembly.
7. Remove the gauge cluster. (Figure E)
8. Remove (4) 3/16" Allen screws from the
sides of the radio. (Figure F)
Note: These screws will be reused with
the kit assembly.
9. Slide the radio out toward the rear of
the bike, disconnect the wiring, and
then remove the radio. (Figure F)
(Figure E)
(Figure F)
Bekijk gratis de handleiding van Axxess AXPIO-HD2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXPIO-HD2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4362 MB |
