Axxess AXPIO-COL1 handleiding
Handleiding
Je bekijkt pagina 3 van 24
3
REV. 7/25/24 INSTAXPIO-COL1
DASH DISASSEMBLY
If using the LD-LAN09-PIO:
1. Using the panel removal tool, unclip the
plastic shroud around the steering wheel
column. (Figure E)
2. Connect the LD-GMSWC to the 10-pin
straight row connector located in the
steering column.
3. Route the LD-GMSWC cable through the
steering column into the dash and back
towards the radio area.
4. Remove (3) bolts from the lower trim
cover. Rotate the steering wheel to gain
access to the bolts, then remove the
forward facing bolts. (Figure F)
NOTE: If RPO is IO5 or IO6, use the LD-LAN09-PIO.
If RPO is IOB, use the LD-LAN10-PIO.
Continue to Connections
(Figure A)
3
2
1
(Figure B)
1. Unclip and remove the trim panel
surrounding the radio/climate control
panel. (Figure A)
2. Remove (4) 9/32" screws securing the
radio/climate control panel. (Figure B)
3. Remove (2) 9/32" screws securing the CD
player then unplug and remove the player.
4. Unclip and slide out the factory tuner
module then unplug and remove it.
5. Unclip and remove the climate controls
from the factory trim panel.
6. Unclip and remove the climate control
vents from the factory trim panel.
Continue to Connections
(Figure A)
(Figure B)
Bekijk gratis de handleiding van Axxess AXPIO-COL1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXPIO-COL1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4835 MB |
