Axxess AXDSPX-WR handleiding
Handleiding
Je bekijkt pagina 2 van 12
2
Aftermarket radio system:
The AXDSPX-WR can be used with an aftermarket radio to improve the overall listening
experience for car audio enthusiasts. Installers will connect the RCA inputs from the AXDSPX-WR
to the outputs from the aftermarket radio; Front, Rear, Sub (sub is optional).
(refer to page 4)
Adding a subwoofer to an existing radio:
This feature offers the Installer the ability to add an aftermarket subwoofer to an existing radio.
(refer to page 5)
Full range system to an existing radio:
This option allows the Installer to wire the AXDSPX-WR directly to the speaker outputs from an
existing radio for a full range audio signal (high-level).
(refer to page 6)
PREFACE
INSTALLATION OPTIONS
In the following section, Installation Options, choose the installation type, then either click
on the hyperlink, or reference the page number.
The AXDSPX-WR provides a 12v 1-amp output to turn on an aftermarket amplifier. If
installing multiple amplifiers, an SPDT automotive relay will be required if the current
exceeds that amount. Use Metra part number E-123 (sold separately) for best results.
The AXDSPX-WR can also grow as your stereo system grows. Start off by adding a
subwoofer, then add on from there. Simply reference the Installation Options page to
change the AXDSPX-WR to the new system. All 10 channels of the AXDSPX-WR can be
assigned however needed for the installation at hand. If 10 channels of a subwoofer signal is
needed, the AXDSPX-WR can do it.
Bekijk gratis de handleiding van Axxess AXDSPX-WR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXDSPX-WR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1369 MB |
