Axxess AXDSPX-HK4 handleiding
Handleiding
Je bekijkt pagina 2 van 8
2
1. Locate the factory amp, unplug all connectors, then remove the amp.
Note: Amp location is on the following page.
2. Install the LD-DSP-HYKIA4 harness and make all necessary connections, but leave
the amp turn-on wire disconnected.
3. Plug the 16-pin and 20-pin connectors from the LD-DSP-HYKIA4 harness into the
AXDSP-X.
4. Download and install the AX-DSP-XL app for your smart device.
5. Open the app and follow the instructions on the Bluetooth
Connection tab to pair the
mobile device to the AXDSP-X. (Figure A)
6. Scroll to the Configuration tab then select the vehicle type. Press the Lock Down
button to save the configuration. (Figure B)
7. Connect the amp turn-on wire from the LD-DSP-HYKIA4 harness. Click the Identify
button to confirm that the AXDSPX-HK4 is connected properly. If so, a chime will
be heard from the front left speaker. Test all functions of the installation for proper
operation.
Note: The outputs may need to be configured within the Outputs tab.
8. Adjust the DSP settings in the app as desired. Refer to the instructions under the
Setup Instructions tab, or online at Axxessinterfaces.com for an explanation of each
tab in the app.
(Figure A)
(Figure B)
I N STALL ATI O N
Bekijk gratis de handleiding van Axxess AXDSPX-HK4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXDSPX-HK4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1257 MB |
