Axxess AXDSPX-A2B2 handleiding
Handleiding
Je bekijkt pagina 5 van 8
5
REV. 2/13/24 INSTAXDSPX-A2B2
5
AX-DSP-A2B2
Interface
AXBX-1
RCA Jacks
(sold separately)
AXBK-1
Blue/White - Amp Turn-On Wire
Red/White - Not Used
To Aftermarket
Amplifiers
Channel Programming
is done through the
AXDSP-XL App
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
CH9
CH10
Remote Bass Knob
Level Control for Ch5 and Ch6
LD-A2B-ADAPT
Factory Amp Harness Amp Bypass Harness
AXDSP Input Harness
Factory Amp
(must be removed)
A2B-EXT
Extension Cable
Right 2 input
Center input
Left 2 input
Right 1 input
Left 1 input
TBD
18-Pin
12-Pin
NOT USED
Factory Amplifier Locations
Please see Speaker Assignment QR Code
located on the back page of instructions.
Please see Speaker Assignment QR Code
located on the back page of instructions.
CONNECTIONS TO BE MADE AT THE FACTORY AMPLIFIER’S LOCATION
1. Locate the factory amp, unplug all connectors, then remove the amp.
2. Install the AXDSPX-A2B2 harness and make all necessary connections, but leave the amp turn-on wire disconnected.
Bekijk gratis de handleiding van Axxess AXDSPX-A2B2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXDSPX-A2B2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1053 MB |
