Axxess AXDSPX-A2B1 handleiding
Handleiding
Je bekijkt pagina 4 van 6
4
I N STALL ATI O N
1. Locate the factory amp (†), unplug all connectors, then remove the amp.
2. Install the AXDSPX-A2B1 harness and make all necessary connections, but leave the amp
turn-on wire disconnected.
Note: Ensure the USB connector from the factory amp is connected to the AXDSPX-A2B1.
3. Plug the 12-pin and 16-pin connectors from the AXDSPX-A2B1 harness into the
AXDSPX-A2B1 interface.
4. Download and install the AXDSP-X app from the Google Play Store or Apple App Store.
5. Open the app and follow the instructions on the Bluetooth Connection tab to pair the
mobile device to the AXDSPX-A2B1. (Figure A)
6. Scroll to the Configuration tab then select the vehicle type. Press the Lock Down button to
save the configuration. (Figure B)
7. Connect the amp turn-on wire from the AXDSPX-A2B1 harness.
8. Click the Identify button to confirm that the AXDSPX-A2B1 is connected properly. If so, a
chime will be heard from the front left speaker or gauge cluster. Test all functions of the
installation for proper operation.
9.
Adjust the DSP settings in the app as desired. Refer to the instructions under the Setup
Instructions tab, or online at Axxessinterfaces.com for an explanation of each tab in the app.
Note: In these vehicles the factory radio powers some speakers.
Escape: Front tweeters / Center channel
Fusion: Front tweeters / Front center channel / Rear center channel
(†) Amplifier Location
Escape: Behind the left rear quarter panel
Fusion: Behind the right rear quarter panel
(Figure A)
(Figure B)
Bekijk gratis de handleiding van Axxess AXDSPX-A2B1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXDSPX-A2B1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 776 MB |
