Axxess AXDIS-HK4 handleiding
Handleiding
Je bekijkt pagina 10 van 12
10
Dual Assignment Instructions (Long Button Press)
The AXDIS-HK4 interface has the capability to assign (2) functions to a single button, except
Volume Up and Volume Down. Follow the steps below to program the button(s) to
the
desired setting.
Note: Seek Up and Seek Down come pre-programmed as Preset Up and Preset Down for a long
button press
.
1. Turn the key to ignition but do not start the vehicle.
2. Press and hold the desired steering wheel control button for (10) seconds, or until the LED
flashes rapidly. At this point release the button; the LED will then go solid.
3. Press and release the Volume Up button the number of times corresponding to the new
button number selected. Refer to the Dual Assignment Legend. The LED will flash rapidly
while the Volume Up button is being pressed, and then go back to a solid LED once
released. Proceed to the next step once the Volume Up button has been pressed the desired
number of times.
Caution: If more than (10) seconds elapses between pressing the Volume Up button, this
procedure will abort, and the LED will go out.
4. Press the desired button to store it to memory. The LED will now go out indicating the new
information has been stored to memory.
Note: These steps must be repeated for each button desired to assign a dual assignment
feature to. To reset a button back to its default state, repeat Step 1, then press the Volume Down
button. The LED will go out, and the dual assignment feature for that button will be erased.
STEERING WHEEL CONTROL SETTINGS
(CONT.)
Dual Assignment Legend
1. Not allowed
2. Not allowed
3. Seek-Up/Next
4. Seek-Down/Prev
5. Mode/Source
6. ATT/Mute
7. Preset-Up
8. Preset-Down
9. Power
10. Band
11. Play/Enter
12. PTT
13. On-Hook
14. Off-Hook
15. Fan-Up *
16. Fan-Down *
17. Temp-Up *
18. Temp-Down *
* Not applicable in this application
Bekijk gratis de handleiding van Axxess AXDIS-HK4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXDIS-HK4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 875 MB |
