Axxess AXDIS-FD2 handleiding
Handleiding
Je bekijkt pagina 7 van 8
7
REV. 11/22/24 INSTAXDIS-FD2
Note: Not all radios will have all of these commands. Please refer to the manual provided with the
radio, or contact the radio manufacturer for specific commands recognized by that particular radio.
* Not applicable if the vehicle is equipped with SYNC
®
** Not applicable in this application
3. Release the Volume-Up button, the LED will then go out; The Volume-Up button has now
been programmed.
4. Follow the list in the Button Assignment Legend to reference the order in which the
steering wheel control buttons need to be programmed.
Note:
If the next function on the list is not on the steering wheel, press the Volume-Up
button for (1) second until the LED comes on, and then release the Volume-Up button.
This will tell the AXDIS-FD2 that this function is not available and it will move on to the
next function.
5.
To complete the remapping process, press and hold the Volume-Up button on the
steering wheel until the LED in the AXDIS-FD2 goes out.
1. Volume-Up
2. Volume-Down
3. Seek-Up/Next
4. Seek-Down/Prev
5. Source/Mode
6. Mute
7. Preset-Up
8. Preset-Down
9. Power
10. Band
11. Play/Enter
12.
PTT (Push to Talk)
*
13. On-Hook *
14. Off-Hook *
15. Fan-Up **
16. Fan-Down **
17. Temp-Up **
18. Temp-Down **
Dual Assignment instructions (Long Button Press)
The AXDIS-FD2 has the capability to assign (2) functions to a single button, except Volume-Up
and Volume-Down. Follow the steps below to program the button(s) to your liking.
Note:
Seek-Up and Seek-Down come pre-programmed as Preset-Up and Preset-Down for a
long button press.
STEERING WHEEL CONTROL SETTINGS (CONT)
Button Assignment Legend
Continued on the next page
Dual Assignment Legend
1. Not allowed
2. Not allowed
3. Seek-Up/Next
4. Seek-Down/Prev
5. Mode/Source
6. ATT/Mute
7. Preset-Up
8. Preset-Down
9. Power
10. Band
11. Play/Enter
12. PTT
13. On-Hook
14. Off-Hook
15. Fan-Up *
16. Fan-Down *
17. Temp-Up *
18. Temp-Down *
*Not applicable in this application
1. Turn on the ignition but do not start the vehicle.
2. Press and hold down the steering wheel control button that you want to assign a long press
function to for about (10) seconds, or until the LED flashes rapidly. At this point release the
button; the LED will then go solid.
3. Press and release the Volume-Up button the number of times corresponding to the new
button number selected. Refer to the Dual Assignment Legend. The LED will flash rapidly
while the Volume-Up button is being pressed, and then go back to a solid LED once
released.
Bekijk gratis de handleiding van Axxess AXDIS-FD2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXDIS-FD2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 849 MB |
