Axxess AXDI-MB1 handleiding
Handleiding
Je bekijkt pagina 3 van 8
3
REV. 1/25/23 INSTAXDI-MB1
INSTALLATION PROGRAMMING
With the key in the off position:
• Connect the LD-AX-XSVI-MB1 or LD-AX-XSVI-MB2 harness into the interface, and then to the
wiring harness in the vehicle.
Attention! If the interface loses power for any reason, the following steps will need to be
performed again. Also, if installing an AXSWC connect it after you initialize and test the interface/
radio, with the key in the off position.
• Turn the key (or push-to-start button) to the ignition position and wait until the radio comes on.
Note: If the radio does not come on within 60 seconds, turn the key to the off position,
disconnect the interface, check all connections, reconnect the interface, and then try again.
• Turn the key to the off position, and then to the accessory position. Test all functions of the
installation for proper operation, before reassembling the dash.
Note: If using the AXSWC, connect it after you initialize the AXDI-MB1, with the key in the off
position.
Bekijk gratis de handleiding van Axxess AXDI-MB1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXDI-MB1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 867 MB |
