Axxess AXDI-FOC handleiding
Handleiding
Je bekijkt pagina 3 van 4
3
REV. 12/20/24 INSTAXDI-FOC
I N STALL ATI O N
PROGRAMMING
With the key in the off position:
• Connect the LD-FD212 harness into the interface, and then to the wiring harness in the
vehicle.
Attention! If the interface loses power for any reason, the following steps will need to be
performed again. Also, if installing an AXSWC connect it after you initialize and test the
interface/radio, with the key in the off position.
1. Turn the key (or push-to-start button) to the ignition position and wait until the radio
comes on.
Note: If the radio does not come on within 60 seconds, turn the key to the off
position, disconnect the interface, check all connections, reconnect the interface, and
2. Turn the key to the off position, and then to the accessory position. Test all functions
of the installation for proper operation, before reassembling the dash.
Note: If using the AXSWC, connect it after you initialize the AXDI-FOC, with the key in
the off position.
Bekijk gratis de handleiding van Axxess AXDI-FOC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXDI-FOC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 454 MB |
