Axxess AXDI-FD3 handleiding
Handleiding
Je bekijkt pagina 3 van 4
3
REV. 9/8/23 INSTAXDI-FD3
I N STALL ATI O N
PROGRAMMING
With the key in the off position:
1. Connect the AXDI-FD3 harness into the AXDI-FD3 interface, and then to the wiring harness
in the vehicle.
Note: If installing an AXSWC, connect it after you program and test the AXDI-FD3, with the
key in the off position.
Attention! If the interface loses power for any reason, the following steps will need to be
performed again.
1. Cycle the engine on.
Note: If the radio doesn’t come on within 60 seconds, turn the key to the off position,
disconnect the interface, check all connections, reconnect the interface, and then try again.
2. Cycle the ignition off, then back on.
3. Test all functions of the installation for proper operation.
Bekijk gratis de handleiding van Axxess AXDI-FD3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXDI-FD3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 497 MB |
