Axxess AXAC-CH5 handleiding
Handleiding
Je bekijkt pagina 5 van 16
5
REV. 7/3/25 INSTAXAC-CH5
CONNECTIONS
For models with a factory backup camera:
The camera signal will need to be interrupted and connected to the corresponding input/output
RCA jacks from the interface.
• Connect the RCA jack from the AXAC-CH5 vehicle harness labeled “Camera input”, to the RCA
jack from the AXAC-CH5 interface harness labeled “Camera output”.
• Connect the RCA jack from the AXAC-CH5 vehicle harness labeled “Camera output”, to the
RCA jack from the AXAC-CH5 interface harness labeled “Camera 1”.
• Disregard the following (3) wires: Blue/Green, Green/Blue, Red
For models without a factory backup camera:
• Connect the RCA jack from the AXAC-CH5 vehicle harness labeled “Camera input”, to the RCA
jack from the AXAC-CH5 interface harness labeled “Camera output”.
• Connect the RCA jack from the AXAC-CH5 interface harness labeled “Camera 1”, to the
aftermarket backup camera.
• Disregard the RCA jack labeled “Camera output” from the AXAC-CH5 vehicle harness.
• Connect the Red wire from the AXAC-CH5 interface harness labeled “Camera 12V”, to the
power wire from the aftermarket backup camera.
• Disregard the following (2) wires: Blue/Green, Green/Blue
For models with an aftermarket radio:
• If the vehicle is equipped with a factory backup camera: Connect the RCA jack from the
AXAC-CH5 vehicle harness labeled “Camera output”, to the RCA jack from the AXAC-CH5
interface harness labeled “Camera 1”.
Camera Input:
Camera 1 Backup camera input
Camera 2 Left or right camera, user assignable
Camera 3 Left or right camera, user assignable
Camera 4 Front camera
Analaog control trigger wires:
The (optional) analog control wires can be used with either a negative
or positive trigger, depending on how they are configured in the Axxess Updater. These wires will only
be used for manual control of the camera(s). Otherwise disregard them.
Control Wire Wire Color
Control 1 Gray/Blue
Control 2 Gray/Red
Control 3 Orange
Control 4 Orange/White
• If the vehicle is not equipped with a factory backup camera: Connect the RCA jack from
the AXAC-CH5 interface harness labeled “Camera 1”, to the aftermarket backup camera.
Disregard the RCA jack labeled “Camera output” from the AXAC-CH5 vehicle harness.
• Disregard the RCA jack labeled “Camera input” from the AXAC-CH5 vehicle harness.
• From the AXAC-CH5 vehicle harness: Connect the Gray/Blue wire labeled “Reverse”, to the
Gray/Blue wire labeled “Control 1”.
• Disregard the Red wire from the AXAC-CH5 vehicle harness labeled “Camera 12V”.
• Connect the Red wire from the AXAC-CH5 interface harness labeled “Camera 12V”, to the
reverse trigger from the aftermarket radio.
Bekijk gratis de handleiding van Axxess AXAC-CH5, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXAC-CH5 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3124 MB |
