Axxess AX-LOC6.6-PRO handleiding
Handleiding
Je bekijkt pagina 12 van 16
12
MULTI-FUNCTION REMOTE
1. Rotary Encoder: This compact remote controller features two knobs. One is the Primary knob
for adjusting CH1/2/3/4/5/6 primary volume, while the other is for CH5/6 bass level control. You
can also press the Primary knob to toggle between Main and AUX sources.
2. Source/Function LED: There are four LED modes: solid red, ashing red, solid blue, and ash-
ing blue. When selected for high-level input from the source unit, the LED indication is solid red.
When adjusting the level, the blue LED ashes until it reaches the minimum or maximum level,
and then it turns into solid red. When the Auxiliary source is selected, the LED indicator is solid
blue. When adjusting the level, the red LED ashes until it reaches the minimum or maximum
level, and then it turns into solid blue.
3. Remote Level Control Jack: This RJ45 jack is used to connect the remote to the RLC port on the
main AX-LOC6.6-PRO unit using the supplied 16.4’ cable, which is a standard 8-conductor Ether-
net cable.
1. Rotary Encoder: This compact remote controller features two knobs. One is the
Primary knob for adjusting CH1/2/3/4/5/6 primary volume, while the other is for
CH5/6 bass level control. You can also press the Primary knob to toggle between Main
and AUX sources.
2. Source/Function LED: There are four LED modes: solid red, flashing red, solid blue,
and flashing blue. When selected for high-level input from the source unit, the LED
indication is solid red. When adjusting the level, the blue LED flashes until it reaches
the minimum or maximum level, and then it turns into solid red. When the Auxiliary
source is selected, the LED indicator is solid blue. When adjusting the level, the red
LED flashes until it reaches the minimum or maximum level, and then it turns into
solid blue.
3. Remote Level Control Jack: This RJ45 jack is used to connect the remote to the RLC
port on the main AX-LOC6.6-PRO unit using the supplied 16.4’ cable, which is a
standard 8-conductor Ethernet cable.
1. Find a suitable mounting location of the Dual Control Bass Knob and run the control
wire to that location in the vehicle. The Dual Bass Knob is included and offers the
ability to control overall System Levels and the output level of channel 5 and 6
(Subwoofer Level).
2. The six RCA output channels are used to connect signals to your amplifier(s). The
output from CH3/4 and CH5/6 depends on their corresponding INPUT CH settings,
while CH1/2 is determined by its output select switch. When using an AUX source, the
left/right stereo signals are sent to all output pairs. To maintain stable connections
and minimize potential noise, it is recommended to use high-quality RCAs.
Bekijk gratis de handleiding van Axxess AX-LOC6.6-PRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AX-LOC6.6-PRO |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1444 MB |
