AVPro Edge MXNet AC-MXNET-1G-AVDM Handleiding (78 Pagina's)

Handleiding

Page 23 of 78

MXNET 1G USER MANUAL

3.6 AC-MXNET-SW10

10-Port Network Switch Front Panel

10-Port Network Switch Rear Panel

1

POWER SUPPLY

•

100~240V AC, 50~60Hz 3A power input

• Total power consumption is less than 132 W

• PoE+ budget of 124 W

2

GROUND SCREW

•

Connect with a grounding cable to the conducting parts

3

RST

•

Recessed button, use a paperclip or pen to press in and hold for 7

seconds to restore network switch to factory default settings

4

DIAG / PWR

•

Green LED status indicator lights

• DIAG light steadily flashes green to indicate a continuous diagnostic of

the system and the network switch is running on normal operations

• PWR light stays solid green to indicate the switch is powered on

5

ACTIVITY LIGHTS 1-10

•

Green LED status indicator lights

•

Steady flickering green light to indicate network activity is present

6

1GbE COPPER PoE

PORTS 1

-8

•

(8x) 8-pin RJ-45 female connector ports, 1000BASE-T copper Ethernet

• Supports standard PoE power, IEEE 802.3AF (15.4 W)

• Maximum power consumption of 6.5 W

• 10/100/1000Mbps auto-negotiation

• MDI/MDI-X cable mode auto-negotiation

• Maximum distance 100m (330ft) over Cat5e and higher

• Connects to the encoders, decoders, and CBOX

7

1GbE / SFP COMBO

PORTS 9

-10

•

Supports a 1 Gigabit Ethernet copper connection or SFP fiber module

for longer runs to the BI DIR. O.M. LC Fiber port on the encoders and

decoders

8

CONSOLE

•

8-pin RJ-45 female connector port

• Used for accessing the MXNet CLI

Bekijk gratis de handleiding van AVPro Edge MXNet AC-MXNET-1G-AVDM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.