AVPro Edge MXNet AC-MXNET-1G-AVDM Handleiding (78 Pagina's)

Handleiding

Page 21 of 78

MXNET 1G USER MANUAL

3.5 AC-MXNET-CBOX

CBOX Front Panel

CBOX Rear Panel

1

STATUS MONITOR A

•

Built-in front panel mini-OLED screen “data window”

• Displays the MXNet LAN and system control network information

2

SCROLL BUTTON A

•

Press to cycle through the network settings on the STATUS MONITOR A

screen

3

STATUS MONITOR B

•

Built-in front panel mini-OLED screen “data window”

•

Displays the MXNet AV network information

4

SCROLL BUTTON B

•

Press to cycle through the network settings on the STATUS MONITOR B

screen

5

DHCP

•

Press button to toggle between DHCP (default) and STATIC IP mode

NOTE: It is recommended to change the IP address to STATIC after all the

MXNet devices have been successfully installed and the Mentor web UI has

been accessed.

6

SYSTEM RESET

•

Recessed button, use a paperclip or pen to press in and hold for 7

seconds to restore all factory default settings

7

PROPRIETARY USB

• Service port for AVPro Edge technical assistance

8

PORT 1 MENTOR

LAN / CONTROL

•

8-pin RJ-45 female connector port

• Connects to a LAN, router, or third-party control system processor

9

PORTS 2-7

•

(6x) 8-pin RJ-45 female connector ports

• Supports standard PoE power, IEEE 802.3AF (15.4 W)

• Maximum power consumption of 4.5 W

• Maximum distance 100m (330ft) over Cat5e and higher

• LAN network extender for MENTOR PORT 1

Bekijk gratis de handleiding van AVPro Edge MXNet AC-MXNET-1G-AVDM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.