AVPro Edge MXNet AC-MXNET-1G-AVDM Handleiding (78 Pagina's)

Handleiding

Page 19 of 78

MXNET 1G USER MANUAL

3.4 AC-MXNET-1G-D / AC-MXNET-1G-DV2

Decoder Front Panel

Decoder Rear Panel

1

POWER STATUS

•

Blue LED status indicator light

• Slowly pulsates until startup is complete after a reboot, at which point the

light will turn solid blue

2

LINK STATUS

•

Green LED status indicator light

• Continuously flashes until an output device is connected to the HDMI OUT

port on the decoder, at which point the light will turn solid green

3

EDID COPY

•

Press to copy the EDID of the sink device connected to the HDMI OUT port

on the back of the decoder

4

RS232

•

3-pin terminal block connector port

• Sends encapsulated/virtualized RS-232 (serial pass-through) over IP via the

MXNet API

• Supports serial routing with direct connection to a control system processor

5

I-PASS

•

3.5mm stereo jack (TRS) IR receiver port

• Sends IR signal pass-through via an IR emitter, IR bridge, or control system

processor

6

IR-EYE

•

3.5mm stereo jack (TRS) IR receiver port

• Supports a flashing IR emitter from an IR bridge or control system processor

7

IR OUT

•

3.5mm mono jack (TS) IR receiver port

• Sends encapsulated/virtualized IR signals upstream via the API

8

IP MONITOR

•

Built-in front panel mini-OLED screen “data window”

• Displays decoder’s custom name or MAC address (if no custom name is

assigned) and IP address

9

USB 1

•

USB 2.0 Type A female connector port

• Supports routing USB 2.0 signals to a designated host encoder

Bekijk gratis de handleiding van AVPro Edge MXNet AC-MXNET-1G-AVDM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.