AVMATRIX Shark S8X-Plus handleiding
Handleiding
Je bekijkt pagina 33 van 57
SHARK S8X PLUS
8CH Video Switcher
28
12.Input Settings
12.1. Source Selection
The S8X supports input signal routing configuration. The 8 preview screens (View1-View8) can freely
select the same or different input signal sources (including IN1-IN8 and AUX sources), allowing
flexible configuration of screen order. There is no need to unplug and plug interface cables to
complete the custom adjustment of screen order.
View 1 and View 2 support flip functions, including horizontal flip, vertical flip, and 180° rotation flip,
which are commonly used for correcting image orientation from aerial photography, PTZ inverted
cameras, etc. It also supports adjustment of brightness, contrast, and saturation of the image.
To restore the default routing configuration, you can select the source reset option to restore the
default state. In the default state, screens correspond to interfaces in order. Input 7 and Input 8
default to the HDMI input signal.
Note: In all functions of the S8X where there is a corresponding signal source selection, the selection
is based on the preview screen number. If the routing is in the default state, it corresponds to the
interface. If the routing configuration has been changed, refer to the order of the preview screens,
which may not correspond to the interface.
12.2.Multiplexed Interface
The switcher has 8 channels of 3G-SDI input and 2 channels of 4K HDMI input. Among them, the 7th
and 8th input interfaces are multiplexed interfaces. Users can set the input signal for IN7 and IN8 to
SDI or HDMI in the input settings.
Bekijk gratis de handleiding van AVMATRIX Shark S8X-Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AVMATRIX |
| Model | Shark S8X-Plus |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 21670 MB |
