AudioControl Maestro X9S handleiding

52 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 12 van 52
12
X/XR Series Processors & Receivers
HTR-3 Remote Control
The supplied remote control is an
eight device “universal” IR remote
controller with back-lit gum-drop
buttons. Use the remote for full
control of the Processor/Receiver,
plus various AV sources and displays
via the extensive library of device
codes. A complete list of codes is
available on our Knowledge Base at:
audiocontrol.com/knowledge-base/.

The remote is also a “learning
remote” which means that you can
capture the codes of your existing

does not contain the codes for your
device.
Many of the buttons have more than
one function, depending on which
device/source or mode you are using
the remote in. We will ease into
the complexities of the remote’s
multi-function modes after a quick
description of the basic features
below.
Please note: Device code library,
instructions on programming
the remote and more control
and automation documents are
available on our Knowledge Base at:
audiocontrol.com/knowledge-base/
The speaker terminals labeled surround
right, front right, center, front left, and
surround left, should only be connected
to the passive speakers as labeled. For
example, make sure that only a center
speaker is connected to the center
speaker terminal.




back speakers, Dolby Atmos and
DTS:X speakers, or to biamp the front
speakers. Use the Setup Menu to select
which speakers are being used.
18. VOLTAGE SELECTION - The
Processor/Receiver is designed to


WARNING: Before the unit is
turned on, make sure that this
switch is set to your local AC
power voltage.
19. AC INPUT - Connect the supplied AC
power cord securely to this input. Plug
the other end into an AC mains outlet
of the correct voltage rating for your


Hz); check the position of the Voltage
Selection switch on the rear panel to

20. FAN - A fan is used to cool down the

Concert XR Series Receiver.
CAUTION: Do not block the fan
or any of the ventilation slots.
There should always be plenty of
good ventilation to cool the unit.


Bekijk gratis de handleiding van AudioControl Maestro X9S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkAudioControl
ModelMaestro X9S
CategorieNiet gecategoriseerd
TaalNederlands
Grootte8201 MB