AudioControl Maestro X9S handleiding
Handleiding
Je bekijkt pagina 11 van 52
11
X/XR Series Processors & Receivers
6. FM CONNECTION - This antenna input
should be connected to the supplied FM
antenna. For improved reception, you may
want to consider a roof-mounted external
antenna.
7. DIGITAL AUDIO INPUTS - There are
each labeled with the name of a typical
source unit. Connect these to the digital
outputs of your source units.
8. HDMI INPUTS - Connect digital audio and
video signals from source units equipped
with HDMI outputs. Make sure your
HDMI cables are properly inserted into
these connectors and that there no sharp
“pulls” on the cable that may prevent
your connectors from making a complete
reduces transmission losses resulting in a far
more stable connection than other HDMI
transport solutions.
9. DIGITAL AUDIO OUT - Provides a digital
audio output of the program material
10. 12 VOLT TRIGGER OUTPUTS - These
source units, video projectors, screens and
curtains in the home theater (the external
equipment should have corresponding
11. IR (INFRARED) INPUTS - These jacks
enable the use of external IR sensors for
installations where it is not desirable (or
is used to connect to an external IR sensor
12. RS232 CONTROL PORT - Use this
connection to control your Processor/
Receiver with an automation system.
13. WiFi ANTENNA - If you are using WiFi
features, attach the included antennas here.
14. LIGHT BAR BRILLIANCE SETTING - Press
this button to set the desired luminescence
of that nebulistic front panel light bar to
15. BLUETOOTH ANTENNA - Similar to the
WiFi antenna, if you plan to use Bluetooth
devices for streaming, connect antenna here
to ensure the best possible connection.
16. PREAMPLIFIER OUTPUTS -
output impedance, are at line level, and
can be supplemented or replaced with an
Savoy
G4). Connect the subwoofer outputs to your
active subwoofer(s).
The surround back outputs can be used to
to biamp the front speakers.
Maestro X Series Processors have balanced
XLR preouts in addition to the unbalanced
preouts for connecting to an external
ZONE 2 AUDIO OUTPUTS - Connect to an
17. SPEAKER CONNECTIONS - AudioControl
X/XR Series Processors and Receivers allow
you to connect up to sixteen speakers.
Maestro X Series Processors are designed to
all channels.
connect the main speakers for your two,
Bekijk gratis de handleiding van AudioControl Maestro X9S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AudioControl |
| Model | Maestro X9S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8201 MB |