Audient EVO SP8 handleiding
Handleiding
Je bekijkt pagina 12 van 27
Pressing and holding the Control Wheel will open the Setup Menu where you
can adjust a variety of parameters.
Setup Menu
HARDWARE HARDWARE
Pressing the Control Wheel lets you cycle between the metering for the 8 Preamps
and the 8 Digital Input channels so you can quickly check all your levels.
At 44.1kHz and 48kHz sample rates, you will only need to use 1 optical port for
all 8 channels, with the second port simply acting as a duplicate or split. At
88.2 and 96kHz, you will need to use both optical ports in order to access all 8
channels as higher sample rates will limit the channel count to 4 channels per
port.
The EVO SP8 also includes a BNC Word Clock Input which allows you to clock
the SP8 from another device. You can set the SP8 to use the Word Clock Input
as your Clock Source in the Setup Menu of the interface.
The Word Clock Input also has switchable 75 Ohm Termination which can be
enabled in the Setup Menu. More information about when you may need to use
75 Ohm Termination can be found in the clocking conguration section.
EVO SP8 features two Optical Inputs and two Optical Outputs that use ADAT.
This allows you to send the audio from your preamps to your host interface
as well as receive up to 8 channels and send this out via the Analogue Line
Outputs.
Digital Inputs & Outputs
Word Clock Input
Metering
Bekijk gratis de handleiding van Audient EVO SP8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Audient |
| Model | EVO SP8 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8919 MB |