Atlona AT-VGW-250 handleiding
Handleiding
Je bekijkt pagina 51 van 171
Velocity
51
Sites
6. Select the routing information for the device (if it is not already linked).
Once all devices are set up and linked, the room is ready to be controlled.
Input devices that are not controlled, such as an Extender, can still be shown in the control window.
a. Create an Alias for the device (such as a product SKU or type)
b. Select the Show slider.
c. Choose an Icon or upload a custom icon.
d. Press the SAVE button in the top right corner of the Congure Equipement screen.
NOTE: Atlona device settings must be changed through the device webGUI or Velocity Device Manager. See
device user manual for instructions for login and device settings (such as network settings).
• Show - Select the slider to toggle if the input device will display on the control device or not.
5. Select the control type of the device.
• If TCP, then enter the IP of the device and port number
• If RS-232, then enter the baud rate and type of connection.
Bekijk gratis de handleiding van Atlona AT-VGW-250, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlona |
| Model | AT-VGW-250 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 28056 MB |
Caratteristiche Prodotto
| Certificering | CE, FCC |
| Ethernet LAN, data-overdrachtsnelheden | 10,100,1000 Mbit/s |
| Netwerkstandaard | IEEE 802.1x |
| Temperatuur bij opslag | -20 - 60 °C |
| Output current | 3.42 A |
