Atlona AT-USB-EX350-KIT handleiding
Handleiding
Je bekijkt pagina 12 van 56
AT-USB-EX350-KIT
12
Device Operation
The PWR indicator on both the AT-USB-EX350-HS and AT-USB-EX350-DV provide power state information on both
the AT-USB-EX350-HS and AT-USB-EX350-DV.
LED Indicators
PWR Description
Solid green Unit is powered.
O Unit is not powered.
• Verify that the 2-pin captive screw connector is rmly secured to the power
receptacle.
• Make sure that the power supply is plugged into a live AC outlet.
LINK Description
Solid green Link exists between host and device endpoints.
O Link does not exist between host and device endpoints or device is not powered.
• Verify that there is a category cable connecting the two endpoints.
• If a cable is connecting the two units, check to conrm that the cable is correctly
terminated on both ends.
• Verify that the system is powered.
FW Description
1 Hz Blinking Amber 1 Hz Blinking Amber - Unit is booted and operating normally.
5 Hz Blinking Amber Valens FW has an issue. Contact Atlona Technical Support.
O Unit is not powered or Valens FW did not load.
• Verify that the system is powered. If it is powered and this LED is o, contact
Atlona Technical Support.
Bekijk gratis de handleiding van Atlona AT-USB-EX350-KIT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlona |
| Model | AT-USB-EX350-KIT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6583 MB |
