Atlona AT-OMNI-122 handleiding
Handleiding
Je bekijkt pagina 24 van 129
AT-OMNI-121 / AT-OMNI-122
24
Getting Started
The following table provides a listing of front-panel LED indicators and their status:
LED Description
PWR Off • If using a PoE switch, make sure that the port on the switch that is
connected to the decoder, has PoE enabled. When the decoder is
powered using PoE, the PWR indicator will be green.
• Check the Ethernet cable for possible damage or loose connections.
• Connect the optional 48V DC power supply (available from atlona.
com) to the encoder. When using an external power supply, the PWR
indicator will be green.
Red • The decoder is booting.
Amber • The decoder is booting and/or attempting to locate a DHCP server.
Green • The decoder is ready.
LINK 1 / 2 Red • The optional 48V DC power supply is connected, but no Ethernet
cables are connected between the switch and the ETHERNET port(s).
• Check the Ethernet cable for possible damage or loose connections.
Amber • The decoder is booting.
Green • Link integrity is good between the decoder and the network.
LED Indicators
Bekijk gratis de handleiding van Atlona AT-OMNI-122, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlona |
| Model | AT-OMNI-122 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18571 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 700 g |
| Breedte | 208 mm |
| Diepte | 112 mm |
| Hoogte | 34 mm |
