Atlona AT-OMNI-122 handleiding
Handleiding
Je bekijkt pagina 23 van 129
AT-OMNI-121 / AT-OMNI-122
23
1. Press and hold the ID button for approximately 30 seconds.
2. The LED indicators on the front panel will ash, then turn “o.”
3. The decoder is now reset and will need to be recongured.
1. Connect a PC to serial port 1 using a USB to serial cable.
2. Set the PC console port to the following settings: 9600 baud, 8 data bits, 1 stop bit, no parity.
3. Once connected to the CLI, execute the Mclear command.
1. Log in to the decoder using the built-in web server. Refer to Accessing the Web Server (page 25) for more
information.
2. Click the FACTORY RESET button.
3. The decoder is now reset and will need to be recongured.
Using the ID button
Using the Mclear command
Using the Web Server
WARNING: Performing a factory-default reset will erase all user-programmed settings from the
decoder. IP settings are not preserved.
Resetting to Factory-Defaults
Getting Started
Bekijk gratis de handleiding van Atlona AT-OMNI-122, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlona |
| Model | AT-OMNI-122 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18571 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 700 g |
| Breedte | 208 mm |
| Diepte | 112 mm |
| Hoogte | 34 mm |
